Advanced Communication Solutions - Procom™ Communicator

Home

Procom™ Communicator

ProCom™ provides the ideal solution for communications in extreme conditions. A customised earpiece reduces ambient noise levels by approximately 26dB allowing clear reception and lower volumes. In addition the naturally fitting earpiece locks comfortably into the ear enabling it to be worn for long periods and eliminating the possibility of being dislodged.

Highly durable Teflon cable links the earpiece to a top quality noise cancelling PTT microphone which reduces background noise and offers clear transmit close to hand.

A quick release connector links the unit into the appropriate radio connector lead offering the ability to switch radio units as required.

Technical Specification

Earpiece
Full concha, custom made, medical grade Silicone mould.

Transducers
• Frequency Response: 20 Hz to16 kHz Hz +/-4dB; 50 Hz to 10 kHz +/-2dB
• 1kHz Sensitivity: 108dB SPL for 1.0 Volt Input; 98dB SPL for 1mW
• Impedance: 100 ohms nominal
• Maximum Output:122dB SPL
• Maximum Safe Continuous Input: 3.0 V RMS
• Acoustic Polarity: + Electric = + Acoustic

Cable
• 230mm / 200mm 4 core screened 44awg Teflon cable.

Microphone
• Omni-directional Motorola microphone with Push-To-Talk button.

Quick Release Connector
• Circular quick release 5 pole polamide connector.

Radio Lead
• 600mm 4 core screened cable with moulded Motorola GP300 connector.

Accessories
Adaptor for Motorola GP320 GP340 GP380
Quick release radio connector leads for all standard radio units.

Key Features
• Custom Made for Guaranteed Fit, Comfort and Stability
• Noise Cancelling Microphone
• High Quality and Durable Components
• Quick release radio connector lead

[ Back ]

We'll keep your ears on file...

ACS is pleased to announce the introduction of a new state of the art scanning technology that means ALL customers that order custom made hearing protection and in-ear monitoring products from ACS will have their ear shape on file at ACS for up to 4 years. The device will scan the impressions and save as a file on the database so customers can order new products or replacements instantly without the need to have new impressions taken. What's more, this service will not cost customers anything extra on top of the standard product charge, it is just a little something we want to do to make your experience with us even more enjoyable!

Please be aware that the scanning service began on May 1st 2010 so will only apply to customers that ordered thereafter.

ProCom - SRP £249

Including ProCom System, Soft Carry Pouch, Instruction Leaflet, Cleaning Tool and Comfort Cream.

Your Basket

Your Cart is currently empty.

Find a Dealer

Find your nearest ACS dealer from hundreds across the UK.

View the coverage map >>

Or redeem a CUSTOM VOUCHER at your nearest impression taker using our postcode store locator >>

Please note - ACS products require good deep impressions in order to create a seal in the ear so it is important there is no wax block in the canal that will stop the audiologist from taking an impression. If you think you may have a wax build up, please visit your local GP for a consultation before booking an appointment with a dealer. You may be charged a fee if the audiologist is unable to take an impression.

Contact Us

t : 01295 266665

f : 01295 259093

This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

Full details and map >>

Andy Shiach

Find out more about ex-musician and owner of ACS Andy Shiach and why he's passionate about caring for hearing.
Learn more...

Noise at work

ACS recently visited the Aaron Islands, Galway on behalf of one of our clients to take on-site noise measurements for new drilling equipment

ACS Mobile Screening Service

The complete hearing protection service available on your premises.

Where can I buy ACS products?

ACS products are available from a nationwide network of Audiologists as well as directly from us at our offices in Banbury. You'll need to make an appointment to have impressions taken which will then be sent on to us to allow us to manufacture your custom-fit products. To find your nearest Audiologist see the complete list on our Find A Dealer page. Please note that production time is always dependent upon orders received. The skills and experience involved in making our hand-crafted products are not acquired overnight so employing more staff, whilst increasing our labour force, does not bring an immediate reduction in production time - please bear with us in times of increased demand for our products

How do we custom fit?

All ACS custom-fit products require an impression of your ear for us to work from. Having an impression taken is a quick and painless process that takes less than 10 minutes to complete. One of our network of audiologists will first examine your ear to ensure there is no excessive wax, then a foam plug is applied to create a seal in front of your eardrum. Finally, a soft silicone impression material is injected into the ear and allowed to set for 5 to 8 minutes before being gently removed.